tion. But the color logo will be easier fade away than the debossed inkfil one. Different logo can be printed by difpersonalized wristbands bulkferent method. The regular printing technology is silk print and Overprint. The ink is transferred to the substrate through the graphic part of the mesh via the extrusion of the scraper. The formation of the logo as the original text comes. That is the silk print. The advantage of silk print is that simple equipment, easy operation, easy printing platemaking, low cost and strong adaptability required. If the logo is of more that one color and the colors stand together , then the overprint works. In the printing and dyeing industry, several colors need to be printed on the product , that is so –called overprint. The overprint color sequence should be made according to the features of the inks and the Superimposition rule so as to make the color of the printing close to the original. 1、Molded silicone products Molded silicone products are usually made by being put into the high temperature mold after the addition of curing agent in the solid silica gel through the curing machine pressure and high temperature into a solid. The shape of the mold determines the shape of the molded silicone products. Molded silicone products is currently the most widely used in the silicone industry. So as for silicone bracelets. 2、Extruded silicone products Extruded silicone products are usually extruded through the extrusion of silicone molding. The general shape of the extruded silicone long and tubular which can be cut, but the shape of the extruded silicone has limitations. 3、Liquid silicone products Liquid silicone products are made through the injection molding of silica gel. Because of its soft characteristic, widely used in the simulation of human organs. 1-inch-wide-silicone-wristbandsneon-wristbands-for-events Silicone wristband is not only used as promotional gift, but also as a medical tool. Medical id bracelets is commonly used. It is a high quality silicone bracelets with the ID printed on. We can print bar code, QR code or unique serial number together with some detail of the medical institute. Usually the wristband width need at least 15mm so that the code is clear enough to be scaned. We you scan the code with a phone, the detail of patient napersonalized wristbands bulkme, disease, status will show up. It is a good help for doctor and patient to know the treatment. All the medical bracelets should made from 100% silicone which is harmless and eco friendly to avoid secondary injury to patients.